|
本帖最后由 mangerzoo 于 2011-1-3 16:40 编辑
听别人说装完veket系统之后,触摸板是和XP的使用一样的,而我这里却不行,只能移动鼠标和滚动页面,不知道是不是安装的时候选项没选好还是驱动的问题,或者是装好后系统没配置好。我两台电脑都是笔记本,一台老一点,两台都安装过2.39 、 3.1 、 3.5 、 5.29,触摸板都不能正常点击,很郁闷。
有人说要在“配置系统”里面的“配置鼠标键盘”里设置触摸板可用,然后再到flSynclient里面配置参数,就可以了。可我不知道怎么在“配置鼠标键盘”里面设置,是不是要在那个“Usage for Xdialog”里面写?是的话该怎么写?下面是我的“Usage for Xdialog”里面的内容:
×××××××××××××××××××××××××××××××××××××××××××××
Xdialog v2.3.1 by Thierry Godefroy <xdialog@free.fr> (v1.0 was
written by Alfred at Cyberone Internet <alfred@cyberone.com.au>).
Xdialog home page available at: http://xdialog.dyns.net/
Usage: Xdialog [<common options>] [<transient options>] <box option> ...
Common options:
--wmclass <name>
--rc-file <gtkrc filename>
--backtitle <backtitle>
--title <title>
--allow-close | --no-close
--screen-center | --under-mouse | --auto-placement
--center | --right | --left | --fill
--no-wrap | --wrap
--cr-wrap | --no-cr-wrap
--stderr | --stdout
--separator <character> | --separate-output
--buttons-style default|icon|text
Transient options:
--fixed-font
--password (may be repeated 2 or 3 times before --2inputsbox or --3inputsbox)
--password=1|2 (for --2inputsbox or --3inputsbox)
--editable
--time-stamp | --date-stamp
--reverse
--keep-colors
--interval <timeout>
--timeout <timeout> (in seconds)
--no-tags
--item-help (if used, the {...} parameters are needed in menus/lists widgets)
--default-item <tag>
--icon <xpm filename>
--no-ok
--no-cancel
--no-buttons
--default-no
--wizard
--help <help>
--print <printer> (1)
--check <label> [<status>]
--ok-label <label>
--cancel-label <label>
--beep
--beep-after
--begin <Yorg> <Xorg>
--ignore-eof
--smooth
Box options:
--yesno <text> <height> <width>
--msgbox <text> <height> <width>
--infobox <text> <height> <width> [<timeout>]
--gauge <text> <height> <width> [<percent>]
--progress <text> <height> <width> [<maxdots> [[-]<msglen>]]
--inputbox <text> <height> <width> [<init>]
--2inputsbox <text> <height> <width> <label1> <init1> <label2> <init2>
--3inputsbox <text> <height> <width> <label1> <init1> <label2> <init2> <label3> <init3>
--combobox <text> <height> <width> <item1> ... <itemN>
--rangebox <text> <height> <width> <min value> <max value> [<default value>]
--2rangesbox <text> <height> <width> <label1> <min1> <max1> <def1> <label2> <min2> <max2> <def2>
--3rangesbox <text> <height> <width> <label1> <min1> <max1> <def1> ... <label3> <min3> <max3> <def3>
--spinbox <text> <height> <width> <min value> <max value> <default value> <label>
--2spinsbox <text> <height> <width> <min1> <max1> <def1> <label1> <min2> <max2> <def2> <label2>
--3spinsbox <text> <height> <width> <min1> <max1> <def1> <label1> ... <min3> <max3> <def3> <label3>
--textbox <file> <height> <width>
--editbox <file> <height> <width>
--tailbox <file> <height> <width>
--logbox <file> <height> <width>
--menubox <text> <height> <width> <menu height> <tag1> <item1> {<help1>}...
--checklist <text> <height> <width> <list height> <tag1> <item1> <status1> {<help1>}...
--radiolist <text> <height> <width> <list height> <tag1> <item1> <status1> {<help1>}...
--buildlist <text> <height> <width> <list height> <tag1> <item1> <status1> {<help1>}...
--treeview <text> <height> <width> <list height> <tag1> <item1> <status1> <item_depth1> {<help1>}...
--fselect <file> <height> <width>
--dselect <directory> <height> <width>
--colorsel <text> <height> <width> [<red> <green> <blue>]
--fontsel <font name> <height> <width>
--calendar <text> <height> <width> [<day> <month> <year>]
--timebox <text> <height> <width> [<hours> <minutes> <seconds>]
Special options:
--version (prints version number to stderr and exits).
--print-version (same as above in a cdialog-compatible way).
--print-maxsize (prints maximum menu size in characters and exits).
Note that <height> and <width> are in characters and may be replaced by a single
XSIZExYSIZE[+/-XORG+/-YORG] parameter (like the one passed in the -geometry option
of X) which will represent the size of the Xdialog window in pixels. Specifying
a size of 0 0 (or 0x0) will auto-size Xdialog, while a size of -1 -1 (or -1x-1)
will maximize it.
(1) This Xdialog binary compiled with: lprshell -P<printer>
as the print command. If <printer> is "" (an empty string), the -P
option is not used.
×××××××××××××××××××××××××××××××××××××××××
如果你们一安装就可以正常使用了的,能不能在这里说一下,看是不是我个人的问题。iu |
|