veket易柰问答（互助解答）

无奈了，我是wav格式的，这点我还是知道，只是很奇怪，用系统里面自带的替换就可以，我自己下载的就不行

股神

wav格式也是很多参数的，参数不同吧。

我是thinkpad本本装的，想在veket里面能用上如音量控制的相关热键，百度了一下，说要装什么tpb啥的，可是下载下来后，是一个.tar.gz的文件，执行./configur之后再make就没反应了，请教一下该怎么做啊？以下附上他自带的readme文件内容：希望高手们能给予指点，谢谢

tpb - program to use the IBM ThinkPad(tm) special keys

All the information used in this program was gathered by observing the device
/dev/nvram while pressing the buttons. This was done with the command

'watch --differences=cumulative -n 0 xxd /dev/nvram'

The meaning of the bits in nvram is documented in doc/nvram.txt

This program was originally developed on a Thinkpad T21 (2647-4AG).
It is known to work on

        - A 30
        - A 31
        - R 30 (no hardware mixer)
        - R 31 (no hardware mixer)
        - R 32 (no hardware mixer)
        - R 40
        - S 30
        - T 20
        - T 23
        - T 30 (no hardware switching lcd/crt/both)
        - T 40
        - X 20
        - X 24
        - X 30
        - X 31
        - X 40

Use it at your own risk!!!

Installation:

- enable nvram in your kernel (section character devices), either as module
  or compiled into the kernel

- if you use nvram as module, load it

- make sure that the device /dev/nvram exists, else create it with
  'mknod /dev/nvram c 10 144'

- if you want to use on-screen display install xosd
  (http://www.ignavus.net/software.html)

- if you use the cvs version run "make -f Makefile.dist all"

- run the usual "./configure && make && make install"

- modify the template configuration file /usr/local/etc/tpbrc to change defaults

- run it with something like
  'tpb --osd=on --verbose --thinkpad="/usr/bin/X11/xterm -T ntpctl -e ntpctl"'

  NOTE: With tpb 0.6.2 or later you need to specify the full path for
        applications!

- have a look at the documentation in the man page, the template configuration
  file tpbrc and the output of 'tpb -h'

司马

自己编译有些难度，搜索编译好的。

如果有veket就有pet的，如果没有就搜索debian的deb包用命令转换成pet
debtopet

这东西怎么用?  我安装好了 打开管理器 选了立方体 再 CTRL+ALT+鼠标左键拖动   
但 没用??一点反应都没有 咋回事?  我少做了什么事吗?